Contact Us
Phone/Fax: 1.800.990.2515
Email: info@northamericantools.net

Certificates:
* EPA
* A.S.M.E
* U.L.
* ISO
* TUV
TS25X
Main page >> Home Standby Generators >> TS25X

Baldor TS25 - 20 kW Industrial Standby Towable Generator

This industrial towable generator is designed and engineered for optimum performance and superior reliability. From the ultra quiet sound attenuated enclosures to the state-of-the-art electronics and controls, this unit is designed to meet the most rugged conditions. This full-featured unit is specially suited for all industrial, commercial and rental applications. Can also be used with an automatic transfer switch for standby applications.

Features:

* Large integral fuel tank
* Overspeed shutdown
* Extra large access doors
* Manual or automatic start
* Available with or without the trailer
* High water temperature shutdown
* Overcrank lockout
* Battery included
* Voltage Selections: Three-position switch, no reconnection required
* Low oil pressure shutdown
* Fuel water seperators
* Single point lifting eye

Specifications:

Engine Specifications:

* Engine: John Deere
* Model: 4024TF270
* Cylinders: 4
* Induction System: Turbocharged
* Displacement (Liters/Cu. In.): 2.4/149
* Hp @ Rated Speed: 48
* RPM: 1800
* Bore and Stroke: 3.4" x 4.1"
* Oil Capacity (with filter): 8.5 quarts
* Cooling: Liquid
* EPA Emmisions Level: Tier 2
* Battery minimum cold cranking amps (supplied): 675

Standby Output:

* 3 ph @ 480 Volt (kVA/kW): 25/20
* 3 ph @ 208 or 240 Volt (kVA/kW): 25/20
* 1 ph @ 240 Volt (kVA/kW): 18/18

Prime Output:

* 3 ph @ 480 Volt (kVA/kW): 23/18
* 3 ph @ 208 or 240 Volt (kVA/kW): 23/18
* 1 ph @ 240 Volt (kVA/kW): 18/18

Voltage Selections:

* Voltage 3 Ph Adjustable: 208/220/240/416/440/460/480
* Voltage 1 Ph Adjustable: 120/127/139/240/254/277
* 3-Phase Power Factor: 0.8
* Voltage Regulation: 1/2%
* Frequency: 60 Hz
* Total Harmonic Distortion: <5%
* Insulation Material: Class H

Amperage (Prime):

* 3 ph @ 480 Volt: 27.1
* 3 ph @ 240 Volt: 54.1
* 3 ph @ 208 Volt: 62.5
* Single phase amperage @ 240V/120V: 75/75

Receptacle Specifications:

* 120 Volt 20 Amp Duplex GFCI: 2
* 120/240 Volt 50 Amp CS6369 Twistlock: 2
* Two Wire Remote Start Capability: Standard

Fuel System Specifications (Diesel):

* Fuel Consumption GPH-1/2 Load/(full load): 1.0/(2.1)
* Approximate Run Time (Hours) 1/2 load/(full load) @ Standby Rating: 50/(24)
* Fuel Capacity (Ga.): 50

Capacity and Dimensions:

* Sound Level dBA (Avg.) @ 7 meters, full load: 67
* Dimensions (LxWxH) with trailer: 131" x 62" x 72"
* Dimensions (LxWxH) without trailer: 74" x 38" x 52"
* Weight without Fuel (lbs): 2560
* Weight without Fuel and without Trailer (lbs): 2085

* Warning: Do not connect generator to any building's electrical system unless a disconnect switch has been installed. Follow local and national electrical codes for proper installation.